2008 Harley Davidson FLHX Street Glide "running 1 cylinder" Questions

...1. Turn the ignition switch to the ON position and push the engine OFF/RUN switch on the right handlebar to the RUN position(do not start the motorcycle) 2. Push the throttle to the roll-off position ...

...running on one cylinder if it is duel and one shuts down so it sounds like a dog, will go to a rough idle and be hard to keep going with a major loss in power... Hi, Robert the following applies to ...

...running on the number 1 cylinder and 4 cylinder My bandit 400 when idling is only running on the number 1 cylinder and the number 4 cylinder but when you give it gas it seems like it runs on all for ...

need coil wiring diagram Contact points cover open. Left side points are for cylinders 1 and 4. Right side points are for cylinders 2 and 3 Left side points have a White wire coming from it. Right ...

...running on 1 cylinder backfires on acceleration, and dealer says its running on 1 cylinder, what could cause this and how to fix? possible worn out rings or the other piston might have a hole in the ...

...running rough, checked exhaust pipe at header #2 on rt side sprayed water on it stayed there 1 and 3 evaporated on left side # 2 and 3 water stayed on longer , could it be coils #1 on left also ok ...

My #1 and #2 cylinders are not firing. I have My #1 and #2 cylinders are not firing. I have replaced plugs and coils and they still will not fire. I was doing around 90 the other day after a long ride

...coils? i have the left hand coil running cylinder 1 and 2 and the right running cylinder 3 and 4 but cylinders 2 and 4 are missing when started ...

the bike only runs on cylinders 1 & 4 there is... The bike only runs on cylinders 1 & 4 there is no spark getting to the plugs on 2 & 3 i have changed the coil this had on effect i also ...

...2.2 hours for maximum output.  I couldn't get 2 hours on a motor running 32:1, so I switched to 26:1 for more lubrication and better sealing of the ring.  Long story.I hope this