2008 Harley Davidson FLHX Street Glide "noise primary" Questions

Ad

Question about Harley Davidson FLHX Street Glide Motorcycles

1 Answer

Whining noise from primary case when you roll on throttle. Clutch inner primary bearing gone or primary chain too tight. Auto adjuster on these bikes so more than likely bearing failure.

Ad

Question about Harley Davidson FLHX Street Glide Motorcycles

1 Answer

noise in primary when releasing the clutch sounds like chain slapping It could be the primary chain slapping. When is the last time it was adjusted? Take the inspection cover off that's in the ...

Ad

Question about Harley Davidson FLHX Street Glide Motorcycles

1 Answer

noise, on my 08 streetglide Most likely your primary inner bearing is shot. I have 50k on my FLHX 2008...I have gone through two of them. I also have gone through 4, yes four, IDS bearings on the rear

Question about Harley Davidson FLHX Street Glide Motorcycles

1 Answer

...primary cover. When I put the transmission in gear, the noise stops Does the noise happen only when you pull in on the clutch (disengage the clutch), and go away when you let the clutch out (engage ...

Question about Harley Davidson FLHX Street Glide Motorcycles

1 Answer

...noise from primary case when I roll on the throttle sounds like low to no fluid in gearbox. by rolling throttle it makes fluid rush to back of case . with low fluid all moving parts in case cant get ...

Question about Harley Davidson FLHX Street Glide Motorcycles

1 Answer

noise in engine at 2000rpm could be a few things.... check you primary chain tension, if thats not it check cam chain shoes and tension.and finally if that isnt it check your stator bolt.Mine came ...

Question about Harley Davidson FLHX Street Glide Motorcycles

2 Answers

...noise goes away, I'd check the tension on my final drive belt. If the belt is loose, when the engine tries to slow the motorcycle down, the final drive belt tries to rise up off of the front belt ...

primary casing and causes a noise that can be stopped by pulling in the clutch and putting it in gear. If this is the case, then the bearing is gone. It is replaced by removing all component from left

Question about Harley Davidson FLHX Street Glide Motorcycles

1 Answer

...noise If your engine is running with the clutch out and you pull in the clutch and put the transmission in first gear, you'll hear a clunk, this is normal. The reason is that although your ...

Question about Harley Davidson FLHX Street Glide Motorcycles

1 Answer

noise coming from my primary case on decel .my bike is a 2007 harley ultra classic.there is evedence of the side links being impacted by the compensator. looks like someone hit the chain with a hammer

Not finding what you are looking for?
2008 Harley Davidson FLHX Street Glide Logo

665 questions posted

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...