...oil in the engine transmission and the final drive on my 03 road king? Your bike came with H-D Syn3, 20W50 weight oil, in the engine, transmission, and the primary from the factory. Good Luck ...
Question about Harley Davidson FLHRC Road King Classic Motorcycles
...final drive has a spline shaft. Raise the rear wheel off the ground , loosen the rear axle nut, take out the axle bolt, knock out the spacer , unbolt the rear brake caliper and hang it so you do not ...
Question about Harley Davidson FLHRC Road King Classic Motorcycles
final drive has noise coming from it and gear box i have one of these,check the oil level in the final drive and the colour,replace with good quality 80-90 gear oil,if the noise doesnt go away you may
Question about Harley Davidson FLHRC Road King Classic Motorcycles
...final drive oil on a 2006 r 1200 gs I have a 2006 R 1200 GS. Does anyone make a kit for changing the final drive oil. My bike does not have a drain plug. Any recommendations would be appreciated. ...
...final drive shaft The oil in the drive shaft leaks after riding until the engine cools you have a damaged seal replace it and you should be just fine When checking the final drive oil it not like the ...
Question about Harley Davidson FLHRC Road King Classic Motorcycles
...Final drive gear oil change Honda Shadow Forums Shadow Motorcycle Forum Try Honda shaft drive oil!! http://www.hondashadow.net/forum/72-technical-discussion/64348-final-drive-gear-oil-change.html The ...
Question about Harley Davidson FLHRC Road King Classic Motorcycles
...final drive has a spline shaft. Raise the rear wheel off the ground , loosen the rear axle nut, take out the axle bolt, knock out the spacer , unbolt the rear brake caliper and hang it so you do not ...
...final drive in the rear end bearing area, a clicking/crackling noise when you roll the bike by hand with engine off. You do not hear the noise with engine running and or riding (doesn't get louder). ...
Question about Harley Davidson FLHRC Road King Classic Motorcycles
...final drive ratios on a vulcan 1500 For the gears: Gear ratios:1st 2.500 (40/16) 2nd 1.590 (35/22) 3rd 1.192 (31/26) 4th 0.965 (28/29) 5th 0.781 (25/32) Final Reduction Ratio 2.619 (15/21 x 33/9) and ...
I have a 2001 650 vstar with a blown final drive, can I replace it with any year 650 final drive? depends what you mean by blown final drive?
108 questions posted
Usually answered in minutes!
23 Questions
9 Questions
9 Questions