2006 Harley Davidson XL 1200 R Sporster Roadster "change ignition coil" Questions

change so many things just for ignition the crank needs to be set up for some sort of electronic ignition as this system uses a crank sensor to the ecu to set up timing and spark as well as o2 sensors

Ignition Coil Driver Open/Low P1352 Front Ignition Coil Driver High/Shorted P1354 Rear Ignition Coil Driver Open/Low - Does anyone have any idea of what the problem could be ? Thank you for your help.

coil. Ignition Timing should be right, and according to the manual can’t be changed. I measured the ground at the coil. 0.5 ohm difference between the coil ground and the and battery negative. Checked

Ignition Coil Driver Open/Low P1352 Front Ignition Coil Driver High/Shorted P1354 Rear Ignition Coil Driver Open/Low - Does anyone have any idea of what the problem could be ? Thank you for your help.

ignition coil. Check the connections at the ignition coil,make sure they are clean and tight, If so,..then most likely either A: the ignition coil is bad,or B: the pickup on the stator rotor is bad or

...ignition coil with pulsating voltage when starting; gray wire from igniter to ignition coil with pulsating voltage when starting; IGN + 12 on red/white wire to igniter and ignition coils from engine ...

...ignition coil - should have a pulsating high AC voltage from the CDI. Tested alone, the ignition coil should have 0.1 ~ 0.3 ohms from terminal to ground and 3 ~ 5 kilo ohms high voltage to ground; ...

...ignition coil though, could this be a faulty ignition coil? we have just changed the clocks and ignition barrell, but all wiring is good in that area? Any ideas? Does the bike have an Immobiliser? If ...