2006 Harley Davidson XL 1200 L Sporster Low "oil leaking forks" Questions

...oil out, you'll have to disassemble the fork tube. I would not do this if the seals are not leaking. Replace the screws in the sliders and then remove the top cap from one tube at the time and ...

...leaking oil. How can I fix this? That depends on where it's leaking. If it's leaking down at the axle, You can lift the bike off the ground, remove the front wheel. There's a bolt in the very bottom ...

...either an indy bike shop or a HD dealer shop...your forks are probably leaking oil and need to be repaired. THIS PROCEDURE MUST BE PERFORMED BY AN HD CERTIFIED TECH! DO NOT ATTEMPT THIS ON YOUR

...leaking when I picked the bike up from the owner. left the fork oil under the dirt seal kept bouncing the forks up and down for 4 days the seal got soft from the fork oil so I pulled the dirt seal up ...

...leaking oil. If you have to top them up, there's a few methods out there, one guy I knew used a meter stick to measure the oil in the forks, but if you are going to be in there, you might as well ...

...leaking oil from bottom of the seal. Need to know how to replace seals and add new oil. How much fork oil? need to replace front fork oil seal change the oil seals and oil in the fork,and avoid ...

...oil because the seals are leaking or do you have excessive stiction in the fork? If the seals are leaking, you will have to pull the forks and add new seal and put in exactly the right amount oil. Do ...

...oil through such an opening. If the forks aren't leaking and are working, don't disturb them. If they are leaking you will need to remove and service them. This should be only done by a shop or ...

...tied down in bed of truck. Only the left side leaks. They do not leak if the bike is sitting but oil will show up on the fork even with the smallest movement. Each fork has an outer dust seal, and ...

...oil in the fork. Once it is all leaked out you will find it difficult to control the bike on bumpy roads. Get it checked ASAP. Repair is not very complicated since it requires replacement of the fork ...