2006 Harley Davidson XL 1200 C Sportster Custom "fitting brake light switch seat" Questions

brake line coming out of the master cylinder. Follow it back until you come to a "Tee" fitting with a pressure switch in it. Check to make sure the wires are on the prongs of the switch securely. Good

...ideas? Cheers, J. you have a dead short in your brake light wiring somewhere. Check the switch first as it is a common weak link in the system. Check for pinched areas like seat and kiil switch ...

...seat and foot rest 2. Exhaust system 3. Final drive (if fitted to RHS of machine) 4. Rear wheel, tyre and brake e) Raise the rear wheel and check: 1. Rear wheel, rear brake/components and tyre ...

...fitting end and is positioned to rear of lower housing. Install the throttle control grip over the end of the right handlebar, position the lower housing onto the right handlebar, engaging the lower ...

...switch and cleaned them and put them back together. She started beautifully for the past month until today. I went for a short ride (30 miles or so). Within 1 mile of starting, the F1 and oil lights ...

...fitting where the cable goes into each carb such that there is just a bit of slack in the cable, 1/16" is plenty. Lock ONE of the cable adjusters down tight. All further adjustments will be made on ...