2005 Harley Davidson FLHTCUI Electra Glide Ultra Classic "compensating nut left right" Questions

...nut. It has LEFT HANDED THREADS ON IT. Take it off and the remove the nut that holds the primary chain adjuster off and lift the front sprocket, the clutch, and the chain off all together. The rotor ...

nut is left handed threads so you'll need a torque wrench that will torque left handed fasteners. First, disconnect the battery. To start with, you're going to have to pull the outer and inner primary

...nut has the LEFT HANDED THREADS on it. Don't forget. Remove the nut that holds the primary chain adjuster on. Now grab the compensator sprocket and the clutch assembly and lift the chain, sprocket, ...

nut. Holding the front brake with the bike in gear, slowly release the clutch lever to see if you can recreate the clunking noise right there. It will be on the front left of the primary cover. If you

...nut on the left side of the axle and loosen the cone nut on the right side of the axle using an AXLE NUT TORQUE ADAPTER available from JIM's or H-D (HD- 47925), remove the cone nut and the adjuster ...

was told the compensator nut is a reverse thread. and what is the torque setting? No, it's the CLUTCH HUB NUT that has a left hand (reverse) thread. The COMPENSATOR NUT is a standard right hand thread

compensating sprocket direction of nut and remove clutch basket for 2001 road king need to put on new drive belt help The compensating sprocket has regular threads and will loosen left and tight right

...compensating sprocket nut, the w/shop manual does not mention left hand thread so i am assuming it is right hand thread and if it is how do you undo it i have been leaning on bars but cant budge it, ...

...nut is left handed threads. 60-80 ft lbs torque I think. Check on these torque values as this is what they are on the earlier models that I work on. I doubt Harley has changed them but check to make ...

...harley streetglide clutch nut Engine compensating nut (should not be reused) - 155 -165 ft/lbs, right hand thread,. Clutch mainshaft nut, 70 - 80 ft/lbs, left hand thread. Two drops of 262