2005 Harley Davidson FLHRS - FLHRSI Road King Custom "removing forks" Questions

what socket do i need for removing the caliper bolts on a 2005 road king custom The bolts are metric and use a 10mm 12 point head. To re-install caliper: 1, Loosely install long caliper mounting bolt ...

Road King Custom 05 tightening down the handbars I have a 05 road King Custom and the handlebars have come lose. There is a cover over the top and need to know how to get the cover off so that I can ...

how do i rebuild 41mm forks Depends on how much rebuilding you want to do. See below: FRONT FORK 2.16 CHANGING FORK OIL On a 2010 Touring Motorcycle 41 mm Fork If only replacing the fork oil remove ...

how to install lower sliders on 2008 ultra classic Loosen the fork cap bolt from the fork tube plug at the top of the fork tube, but do not remove it at this time. THEN loosen the pinch bolt (with ...

...forks by removing the bolt inside the fork tubes. Once this is achieved you can pull the forks apart and replace the fork seals. When putting fork oil back into the forks if you are not sure how much ...

What is the firing order on a 1983 Honda Nighthawk 650? Instructions 1 Remove the front tire with the crescent wrench and set aside. Remove the nut and axle bolt from the tier and use the hammer to ...

...forks on it i am sure you can do this without removing the complete fork of the bike, after suporting your bike you can chose to completely remove the fork if you wish, i would first try it without ...

how do you remove the forks on a 2001 fxd superglide Hopefully you will glean all you need to know from this but if you want or need more information or more FXD specific information PLEASE H ...

How much fork oil goes in the forks of an 2001 FXD and how do I do this ? Do you have any diagrams to help me with ? I have no diagrams for you. MAke your own as you take it apart etc and take lots of

change fork oil street bob 2007 To change the oil or to rebuild a 2007 DYNA front fork FIRST raise and support the motorcycle so that the front end is off the floor and the forks are fully extended, ...