2005 Harley Davidson FLHRS - FLHRSI Road King Custom "change riser" Questions

...and you can get to the riser. Loosen the top bolts of the riser and adjust the bars. Unless they've changed something, this should work. Good Luck ...

Just changed the bars and risers on my sportster/nightster '09. Front indicator is now not working. Any idea's? Lost the front left hand indicator since I have changed the bars and risers. ...

...that are specific for the superglide. they raise the bars 2" back and 1" up, without all the cable changes. a little expensive, but these also maintain the proper instrument alignment angle that ...

...riser bushings are made of rubber sandwiched between to metal tubes. They are a loose press fit in the upper triple tree. Measure the depth of the old bushings, drive them out, and then drive the new ...

I'm fixing a 83 Harley-Davidson sportster. The last owner changed the handlebars and they are loose in the tripletree. what might be the problem? If they are loose in the upper triple tree, you ...

how to change the battery in the vrod 1) Open seat. 2) Remove air filter cover. 3) Unsnap clips holding airbox cover on and remove top. 4) Unscrew air filter top and remove top and filter. 5) Remove 6

do i need to change the clutch cable after fitting risers to a rocket 111 touring I would say yes, but it depends on how much slack there still is in the cable and if it can be secured to the new ...

...keep in mind when changing H-bars, not only the height but the width as well. If you're going to change H-bars, plan on lengthening all wiring and replacing cables and the brake hose. Good Luck ...