2005 Harley Davidson XL 1200 C Sportster Custom "primary remove" Questions

...remove the primary cover from you Sporty, you'll have to remove the shifter and foot peg. Then loosen the locknut for the primary chain adjuster and turn the adjuster downwards to loosen the primary ...

...primary cover. Remove the spring and the locknut. Now, remove any footpegs or anything else that may be in the way of the removal of the outer primary. Loosen the locknut on turn the primary chain ...

primary. Remove the derby cover and take the spring and lock nut out of the clutch release mechanism. Remove the bolts that hold the primary cover on. These bolts are different lengths and sizes. Make

...primary cover and remove all the bolts in the outer cover. Turn the clutch adjuster clockwise as your remvove the cover. On the other side of the bike, disconnect the positive battery cable from the ...

primary & trans lube for Sportsters. Remove the derby cover at the rear of the primary cover and fill the primary until the oil level is even with the clutch pressure spring with the bike standing

...primary oil. Remove the shifter and anything else that may be in the way. Loosen the primary chain a couple of turns. Look under the bottom of the primary and there is a bolt with a lock nut on it. ...

...primary cover, remove the shifter, foot peg, loosen the primary chain adjuster under the outer cover, whatever needs to be removed depending on your model Sportster to get the primary cover off. From ...

...remove the primary cover and then remove the two starter mounting bolts and washers with a ball hex driver. THEN remove rear exhaust pipe, remove the positive battery lead and solenoid wire from the ...

primary chain and disconnect the clutch mechanism. Remove the derby cover, spring, and locking nut. As you take the primary cover off, you have to turn the screw clockwise to so that it will come off.

Then disconnect and remove the clutch cable from the coupling slot. 6.Turn the clutch cable counterclockwise and remove it from the primary cover. 7. Remove the O-ring from the lower end of the cable