rear brake light wont work and left indicator wont flash i brought new indicator flasher and new battery wot could it be thanks The rear brake should have a switch about 2 or 3 inches from the rear of
Question about Harley Davidson XL 1200 C Sportster Custom Motorcycles
...rear brake pedal. The rear is activated by a spring connected to the brake pedal. Unhook the spring and see if the light goes out. If it does the unit can be adjusted by screwing the switch further ...
Question about Harley Davidson XL 1200 C Sportster Custom Motorcycles
rear brake pedal wont return to the up possition,it stays stuck down. I had this problem also. I rebuilt the brakes totally and replaced with new fluid. It turned out that somebody greased the shaft ...
Question about Harley Davidson XL 1200 C Sportster Custom Motorcycles
...the brake master cylinder or the brake pedal is not adjusted properly(no free play) If this does not work you will need to remove the rear caliper in its entirety as you probably have a jammed
Question about Harley Davidson XL 1200 C Sportster Custom Motorcycles
...rear brake light switch. I will assume that you have checked the bulb by replacement and also checked all fuses. Check the fuse Check the bulb Check the switches Check wiring The first thing to check ...
Question about Harley Davidson XL 1200 C Sportster Custom Motorcycles
rear brake but will when I push the front brake? I checked the switch with an ohm meter and switch is open without pushing pedal and when pedal is pushed it makes contact. I dont see any broken wires.
Question about Harley Davidson XL 1200 C Sportster Custom Motorcycles
...rear brake disc pads, and now i have no brake pressure. The pedal wont give any pressure to move the pads.Whats the best way to bleed them? HI FIRST OFF CLAMP THE BRAKE HOSE CLOSE TO THE MASTER ...
Question about Harley Davidson XL 1200 C Sportster Custom Motorcycles
rear brake light wont work when bake break is pushed only when front is pushed it works Examine the rear brake pedal and linkage....there should be a light spring that pulls on the brake switch when ...
brake light switch then the rear to see which switch is broken. Also check the bulbs. I have seen them short out internally. The filament inside the bulb break and contacts the other circuit. There is
247 questions posted
Usually answered in minutes!
586 Questions
351 Questions
159 Questions
145 Questions
121 Questions