Question about Harley Davidson XL 1200 C Sportster Custom Motorcycles
...side of the carb. You may have to remove the air cleaner cover to access the screw. Clockwise rotation increases the idle speed. Adjust the idle speed with the engine at full operating
Question about Harley Davidson XL 1200 C Sportster Custom Motorcycles
where is the idel adjustment for 1989 1200 sportster the idle adjustment is the big screw on the side of your carb, usually in the middle or at the very end, there will be two screws, one is for your ...
Question about Harley Davidson XL 1200 C Sportster Custom Motorcycles
...adjust the idle on a 2000 sportster 1200xlc my harley is idling a little low. i was wondering how to adjust it just right. can anyone help You have to drill out the idle screw plug on the bottom of ...
Question about Harley Davidson XL 1200 C Sportster Custom Motorcycles
how do i set idle on 1990 1200 sporster On the side of the carb is an idle adjustment screw. Turn clockwise to turn up idle and counter-clockwise to lower the idle.
Question about Harley Davidson XL 1200 C Sportster Custom Motorcycles
...adjust Take your air cleaner outer cover off. Look at the top of the carb with the large cap on it. Just to the right (towards the front of the bike) is a screw. This is the throttle stop screw. Turn ...
Question about Harley Davidson XL 1200 C Sportster Custom Motorcycles
...adjust the idle cable until it stops and back off just a bit. Lock the lock nut. Now, with the engine OFF, twist the throttle to the wide open position and let go of it. It should 'snap" back to the ...
Question about Harley Davidson XL 1200 C Sportster Custom Motorcycles
and check for proper operation. When you get the bike running, allow it to warm up and then adjust the mixture for highest smoothest idle. Set idle speed to about 1000 rpm with the throttle stop screw
Question about Harley Davidson XL 1200 C Sportster Custom Motorcycles
air idle mixture screw on a Carburetor 2006 sportster The idle mixture screw is on the bottom of the carb behind the float bowl. Unless it has been modified, this screw is covered by an "anti-tamper" ...
247 questions posted
Usually answered in minutes!
586 Questions
351 Questions
159 Questions
145 Questions
121 Questions