2005 Harley Davidson XL 1200 C Sportster Custom "change voltage regulator" Questions

...voltage regulator is going bad? Test the output voltage. With a fully charged battery, connect a digital volt ohm meter across the battery. Red meter lead to positive and black meter lead to the ...

...Voltage regulator: The voltage regulator regulates the charging voltage from the stator to the battery. If it's not working correctly, it can overcharge or undercharge the battery, leading to issues ...

Voltage Regulator, I have just did the 2500 mile oil change and replaced the filter and primary oil, I used Harley 20w50 Synthetic oil instead of the standard 20w50, this is the first 2500 miles after

...change alternator on 1200 xl custom The sportster does not have an alternator, it has a stator. Are you sure it is the stator? First check the stator and see if it is putting out any voltage, to do ...

...all the fusses and the bulb for the check engine light. If the fuel pump wasnt running it wouldnt start at all. I think you have a bad voltage regulator and your engine light would be on if it

...system. on your case you have damage it already that's your light dims whenever you rev the rpm up. so change your voltage regulator of your charging system, charge the battery and it is done

change charging voltage drops below 11 volts at higher rpm's, ive changed my regulator and checked my stator still no change could be bad resister in system,or charging system needs diagnostic

voltage regulator on a 1989 Kawasaki 1000 located Here's a link to your voltage regulator. lunaindustriesinc com Here;s a video on about where it may be. HOW TO CHECK YOUR CHARGING SYSTEM and CHANGING

...if it was the cable or possibly a ground somewhere. wasnt sure where to look unplug your voltage regulator. If the speedometer works while the voltage regulator is unplugged, your regulator is

...voltage is more than about 14.8-15.0v then the regulator is suspect,another way to check is put the voltmeter across the battery and get its reading at idle,then slowly lift the rpm up to about ...