2004 Harley Davidson FXSTD - FXSTDI Softail Deuce "thrust cable" Questions

cable. 2)Remove primary cover, (that's the primary chain case cover). 3)Bend tab on lockplate away from head of jackshaft bolt. Hold pinion gear in place and remove jackshaft bolt lockplate and thrust

...should the cable be on my raptor 660 clutch ,it's a2003 model All clutch cables need about 1/4" slack at the handle bar. This is so the thrust rod is not constantly rubbing on the clutch thrust

...Thrust bearing that attaches to the pull rod for the clutch keeps deterioating and causing clutch cable to loosen. Bearing comes apart in crankcase. overtightened or torqued harleys have simmuler ...

...thrust washer properly in the slot with the jackshaft keyway screw the jackshaft bolt into the starter shaft and while holding the pinion gear in position tighten the bolt to 84-108 in-lbs (9.5-12.2 ...

...thrust bearing that comes into play between the clutch cable and the pressure plate fingers ( throw out bearing in a car) with no noise in neutral or in gear, it suggests that when that bearing is ...

cable then you didn't do it properly. Take it off and do it again 'by the book' ensuring you routed it correctly, no tight bends & fitted it properly at the clutch thrust rod & handle bar end.

cable to engine and see if it actuates the clutch actuating arm or spindle. If lever operates okay and actuates clutch actuating arm, returning when released, your problem lies within. Warm engine and

...cable Remove the primary drive outer cover Remove the oil tank Remove the bolt and cover from the end of the starter. Straighten the tab on the lockplate Wrap the pinion gear with a cloth to protect ...

...cable actuates an axle with a gear at the other end. This gear bears against step gears on the thrust rod, which pushes against clutch. Make sure there is a circlip at BOTH ends of this axle. When ...

...cable gos directly ontop of the pin that I need replace. It's about 4 inches more or less long. A friend of mines broke the pin when changing out my chain. I appreciate you taking ur time reading. ...