2004 Harley Davidson XL 883C Sportster Custom "problems rod" Questions

shifts up not down shifts up wont shift down Problem on shifter inside the gear box.,perhaps a broken spring or a bent rod.

i recently bend my clutch rod at that time fluid was coming out from the clutch rod hole..it may be low because now at a good speed in 6th gear it feels like a its sipping for fluid and starts to tug.

2006 yz 125 breaking push rod in clutch The push rod in my clutch keeps breaking on the left side where the rod meets the lever, it is a clean break in the same place as the previous rod, I have no ...

engine making a loud noise in back cylinder, has good compression what could it be. The following are your choices of what the problem could be > > pre-ignition, aka 'detonation' and 'engine knock'. ...

how to install power rod on a 2001 kx85,we did a piston and ring replacement and the power rod came right off, but how to reinstall is the problem when your putting the barrel back onto the piston ...

...rod problems I changed the clutch plates and accidentally squeezed the clutch which made the clutch push rod come out so that I can't get the pressure plate back on. How do I depress the push rod? ...

...problems instore for you. Are you sure it is a con rod and not piston in cylinder seized? If it is a con rod bearing see what a shop would charge, then see what is available on ebay for parts. I have ...

Gear selection I can only select 1st & 2nd gear, any ideas what the problem might be? Has the bike been dropped on the shifter side??? Has someone kick hard on the shifter leaver???There is a shifting

is the con rod suppose to be moving around? i have a kx60 on a full rebuild and i was wondering if the con rod should have any movement atall, as i took the piston barrel off and the was slight up, ...