Question about Harley Davidson XL 883 Sportster Motorcycles
...front pulley cover. Remove the rear wheel and the shock on the right hand side. You should be able to work the belt off the front pulley and get the new back on. When you put the new belt on and ...
Question about Harley Davidson XL 883 Sportster Motorcycles
...front end thanks should be 39mm dia forks , fxr parts is what your looking for second hand ,or in kit form harley list it i there cat (expencive) jp cycles, us. cheaper alternative. you wil also need ...
...wheel line up with the back Straight the front wheel and adjust the nut connected to rear axis by seeing the front wheel behind rear, when you cant see front wheel, it will align with rear
Question about Harley Davidson XL 883 Sportster Motorcycles
...front wheel axle nut and the clamp nuts and bolts. Also check the headstock nuts and bolts for tightness. Make sure the front and rear wheel spokes are firm. Check the rear wheel axle and swing arm ...
Question about Motorcycles
front wheel doesn't spin freely and squeaks on 2n'd day i got it. Hi James: If New, I'd take it back to the dealer. If used..... Set bike on jack so front wheel is raised. Make sure it is secure so ...
...front wheel or a fault with the front suspention. But it sounds like the front wheel bearing has worn down, so it's loose which makes the wheel not rotate correctly.It may only need one bearing ...
Question about Harley Davidson XL 883 Sportster Motorcycles
...front wheel.the stock wheel is a 21inch.thank you Could not find that specific part number in my catalog, but assuming it is a SuperGlide front wheel, yes it will. You may have to buy the ...
Question about Harley Davidson XL 883 Sportster Motorcycles
...front wheel but the wheel is not off of the ground. Loosen and remove the axle nut and loosen the two bolts on the bottom of the fork slider on one side. Slide the axle out of the wheel. Now, ...
Question about Harley Davidson XL 883 Sportster Motorcycles
...front wheel 1990 zzr1100 how do you remove the front wheel of a 1990 zzr1100 Hi ...... You need to support the bike level (front paddock stand) and undo one side pinch bolt then using the hex adapter ...
...had your front wheel off at any time? What usually happens is the magnetic speed sensor at the front wheel was not lined up properly when the wheel was replace and it broke. A very common
144 questions posted
Usually answered in minutes!
133 Questions
56 Questions
35 Questions