2004 Harley Davidson XL 883 Sportster "front fender forks" Questions

...ground remove brake cal. wire it up out of way.then remove front fender.loosen axle nut and remove and remove wheel then loosen pinch bolt on the thriple trees hang on to fork tubes they may slide ...

...front fender What would cause the front end to bottom out hitting the front fender and denting it Bad fork seals, allowing loss of fork oil. Missing fork oil due to mischief or missing drain plug. ...

...front fender bracket with front fender. 7. Loosen but do not remove fork tube caps. 8. Loosen all pinch bolts on top and bottom triple clamps and pull fork tubes from triple clamps. 9. Remove brake ...

...front of my Pulsar 180 UG3.It touches the fender, so the tyre guy said I need to do alterations to my Forks and fenders(Which I don't prefer doing so). Is that true or there is some problem with the ...

front fender to forks bolts on a VTX 1300 R the bolts in question are the 4 (2 on each side) bolts that hold the retro front fender to the forks. Thank you. Hi ........ What are the head sizes ? 10mm

...guides that may interfere with fork travel. They may have to be repositioned. Your front fender may have loose fasteners and the bracket between the tire and the fender is clanking. Keep on riding, ...

...front fender off can not get plug clip off wires I need to feed wires through fender so I can free fender.Also 1 of the fork tubes was rubbing on fender took off all the paint any ideas to solve my ...

...front fender to see why the tire and fender were not in line. Looking down from the handle bars with the triple clamps square to the frame the tire veirs to the right. The forks are not leaking oil. ...

front fender, the axle retaining bolts, plus the upper and lower headstock bolts and nuts so that the whole assembly is free to align. Tighten the fender last. If that doesn't restore wheel alignment,

...fender and the front frame down tube. To adjust the fender upwards also will make it closer to the frame. If you brake hard and or hit a large bump/pothole etc you risk the fender hitting the frame ...