Question about Harley Davidson FXSTS Springer Softail Motorcycles
...noise had started (no joy). Any suggestion would be great. Sounds like a main bearing. The bad news is the only ways I know of to chack it are, 1)tear the motor down and check for play, or 2)run it ...
Question about Harley Davidson FXSTS Springer Softail Motorcycles
bearing be making the noise? Does the noise sound like a whining noise or goes up and down in tone when you reve the bike in nutral? If it does the primarly drive chain needs to be adjusted. Under the
grinding noise when turning left Wheel bearings, brake pads or head bearings. Check brakes first then wheel. The head bearing would make a grinding noise on both left and right turns.
Question about Harley Davidson FXSTS Springer Softail Motorcycles
...bearing? Well, they usually make a lot of noise before they lock up or come apart. If it's the bearing in the primary that the mainshaft comes through, with the bike running and in gear, hold the ...
Question about Harley Davidson FXSTS Springer Softail Motorcycles
...noise and what needs renewing to sort it. Thanks The clutch has two different types of needle bearings. One flat thrust bearing about 1" diameter and one caged needle bearing. The most likely culprit ...
Question about Harley Davidson FXSTS Springer Softail Motorcycles
...a bearing noise how to fix these noise u need u bottom end bearing replaceing u will need to striping and split the engine in half i wwould recomend u taking it to a shop or look for replacement ...
Question about Motorcycles
...at all if the noise is a tinny rattle with no clutch applied , it is a throw out bearing running on the pressure plate fingers if it is a grumble with pressure applied again it is a throw out ...
honda cbr1000f front end wobble with clunking noise i have a front end wobble with a clunking noise,i have checked the bearings and they seem to be ok Have you checked the neck bearings? The brake ...
Question about Harley Davidson FXSTS Springer Softail Motorcycles
how to remove rear wheel bearings and seals to repack bearings The bearings in the rear wheel are sealed bearings and do not need to be packed, if they are making noise you need to replace them. Pull ...
...noise from the steering head bearing . I have have it all checked out , no movement anywhere. Is it worth while pulling it apart and replacing the top bearing? The bike is a 2006 tiger , 34000 kms on ...
28 questions posted
Usually answered in minutes!
46 Questions
13 Questions
9 Questions