2003 Harley Davidson FXSTS Springer Softail "engine labor time replace" Questions

...engine over, it's probably your "over running clutch" that's bad. You can replace that part and save yourself some money if you know how to do it. But, if you've got to pay shop labor rates, just ...

...ENGINE LIGHT STAYED ON AND IT WOULDNT TURN OF AFTER A WHILE....WHAT CAN IT BE?> I brought my car in to have some sensors replaced. This was necessary for my car to pass inspection. It took 2 ...

...engine does not turn, it's the starter clutch (over running) clutch that is bad. You can replace the clutch if you have the know how and tools and save some money. If you can't do the work yourself, ...

replaced clutch and disk springs. Any thoughts? It sounds like a bad shift fork, shift drum or worn dogs on the gear itself. Very labor intensive. have remove engine from the frame and split the cases

...engine is not turning over, most likely the starter clutch, or over running clutch, in the starter is bad. This can be repaired without replacing the entire starter. It required that the starter be ...

...engine, even to do something like replace head and barrel gaskets that have become brittle from old age, you're looking at a fair amount of labor for a bike that's not considered all that ...

...engine is not turning over. Now, here's the rub on that. If you have the abilitiy to remove the starter, disassemble it, and replace it, you can save yourself some money. If not, you're better off ...

...engine and then it wouldn't start up. Jumped it, flooded it, pushed it home (not all 30 miles, of course!!). I think the first thing to change is probably the regulator/rectifier- the mechanic I ...

...engine and then disassembled. If you can do the job yourself, you can save some money by not having to replace the entire starter. However since disassembling and reassembling the starter is labor ...