2003 Harley Davidson FXSTDI Softail Deuce "wires connect front brake switch" Questions

...front brake - Ninja 250 I have a 2004 Ninja 250. The front brake lever only sometimes triggers the brake light. Looks like a bad contact or brake switch problem. The rear brake light works fine. Any ...

wires when the foot brake is used the brake light does come on remove switch cover on front brake master cylinder.support assembly. check connections at brake cyl.switch,check wires were not 'pinched'

...front brake lever pivots. There would be a small switch with two (2) wires. Often this wires are connected by a spade type connector, remove any of the the two connector/wire and observe if the brake ...

...front brake lever. We checked: - the lever switch is ok; checked it with an electronic multimeter - there is also current of around of 12V when we connected the meter in series with the wires and the ...

...front or rear work...check fuses, light socket and wiring to the light. Wiring damage under the seat is common on many models of bikes...the wires get moved then pinched under the seat. Bulb or ...

...front brake switch doesn't work, you can replace the switch in it but you'll have to remove the switch housing on that side of the handlebar, unplug the wires for the switch, swap out the switch with ...

...the front brake light switch the same way. You'll probably need a schematic to find out which wires you need to check but they usually connect in parallel to the rear brake switch. Good Luck ...

...front brake lever. I checked the lights and they are good. All the other gauges are working as well as the horn. The front brake switch is a plunger style switch and there are no connections you can ...