2003 Harley Davidson FLSTS Heritage Springer "stripped allen wrench" Questions

...The bolt is half stripped and I cannot get it off with an allen wrench.....I assume it turns counter clockwise (lefti lucy) but the more I try the more it is stripping.......any suggestions easy

...allen wrench is stripping bolt. what is best way to get the bolt (pin) out? Use small headed maybe even needle nose vise grips if you can get it on tight, then use a pipe wrench or crescent wrench to ...

...allen wrench and used needle nose pliers to put them into the tops of the allen head hinge bolts. Then used a 6mm box end wrench to loosen them. They are very tight so the box end of the wrench is ...

...stripped, but i am having a difficult time with the bottom screw. it doesnt want to engage. If you're having difficulty with the bottom screw on your Powermate tiller's carburetor, here are a few ...

...allen wrench to loosen and or tighten the 2 switch halves on the bars,they strip easy then the allen just wont grab to unscrew them..headache!you can do it brother! ...

how do you change front brake pad on a kmx same way you do on a car. remove the wheel, take the caliper unit off and replace the pads. 1) Put the bike on a milk crate or a bike jack stand 2) Take off ...

...allen head wrench that fits your drain plug, a oil filter wrench for R- Bike filters, ratchet with a drive that fits the oil filter wrench, paper towels, latex gloves, funnel that fits into the oil ...

...allen wrench) Remove bottom throttle cable first by loosening the 10mm nut, then slide out. unwind it from the throttle wheel and pull it sideways from the wheel through the slot. Remove the upper ...

...wrench that breaks off when you tighten them, so you will have to force something in the look-alike allen key hole. If your steering is locked like mine was you will have to take off the whole front ...

...allen wrench will strip bolt. If you're trying to use a 6 point socket, ...