2003 Harley Davidson FLHTCUI Electra Glide Ultra Classic "gear shift lever tight" Questions

...gear. just started today. shifter lever that connects to shifter pawl has some left to right wobble. Check bolt it is tight,so I shortened Rod between shifter lever 3 turns, now it shifts great. This ...

Shift into 2nd gear clutch in and have someone push you then stand up on the footpegs and slam your buttocks into the seat exactly at the same time let the clutch lever out. For more information about

gear shift shaft and the toe of the lever does not touch the engine sidecover when changing up, you may have a worn roller shift lever or loose screws holding this mechanism in place. See the exploded

...shift the transmission from first to fifth gear without the engine running. Rock the bike forward and backwards while trying to shif the gears. If you can go all the way up and back down, the ...

...selector within the gear box.If itseems tight to shift even when the vechicle is in motion an overalling will be necessary.Make sure the shaft of the gear lever to the gear box is does not have

...shift? Grabbing and stalling as it selects the gear? Start at the clutch lever. Check it is pulling the cable then check at the transmission end that the cable is connected and moving with the lever. ...

...is that I can shift into first gear then second, but no other gears Dear, please get your gearbox checked might be the gears have worned out or the lever is not connected tightly to the gearbox ...

...gear lever is tight on its shaft! you my be able to rock bike back and forth without using the clutch, while shifting the lever at the same time the selctor mechanism inside the cover may be worn or ...

...if its hard to shift in and out of gear while running. there should be two adjustments, a top lever adjuster, and a bottom lever adjuster. always adjust the clutch componets fron bottom to

...shift lever, the pinch bolt may be loose, or more likely, the splines have worn out on the shifter due to a loose bolt. To fix, grab a 10mm wrench and loosen and remove the pass-through bolt that is ...