2003 Harley Davidson FLHTCUI Electra Glide Ultra Classic "adjustment screw classic" Questions

...Loosin the rear axel bolt and turn the adjustment screw in on both side the same amount on both side's. Then tighten the axel nut back down to what the spec foot pounds that the manuel calls

...throttle cable on my 1997 Harley Davidson FLHTCU-I? Nothing. you should have a adjustment screw up top by throttle with locking nuts lossen lock nut then screw outward to tighten and inward to ...

...adjustment. Start by loosening the clutch cable at the midway adjuster. remove the derby cover, (over clutch), which will expose the clutch adjusting screw and nut. Loosen the nut, turn the screw in ...

...classic From the front is the easiest way-- 5 screws and it's out. 1 trim ring, 4 flange. The flange is down stream of the adjustment process. It's where the mounting bracket for the light ...

I Need to adjust My clutch on 2005 Harley,Touring Bike To adjust the clutch on your ultra, first find the clutch cable and follow it down until you find the rubber bellows cover over the clutch cable ...

Classic with 9800 miles. Does clutch need adjusting or do I have a bigger problem? How to adjust clutch? This is part of 5000 mile service.To adjust follow the cable down till you find a boot (rubber)

...adjustment screw back out making the cable longer. You want to leave about an 1/8 inch (thickness of a nickle) freeplay in the cable. Check this either at the lever or right there at the adjuster. ...

...running right now, and you are going to have to take it to the shop anyway, why not try a minor adjustment while the bike is hot. Hey, it worked me. I hope this helps. Good Luck and God

...Adjustment the Easy Way1. Pull the rubber boot from the clutch cable adjuster and Using a 9/16" and a 1/2" open end wrenches loosen the adjuster and collapse the cable which will make the lever ...

how to replace right hand throttle grip 2003 ultra how to replace right hand throttle grip on a 2003 ultra Remove the switch housing screws and spread it away. Loosen the adjuster locknuts on the ...