2003 Harley Davidson FLHTC Electra Glide Classic "replace front brake switch" Questions

...front brake lever. I checked the lights and they are good. All the other gauges are working as well as the horn. The front brake switch is a plunger style switch and there are no connections you can ...

...front of the housing half. You must desolder the wires, replace the switch with a new one, and resolder the original wires to the new switch. Reassemble the throttle sleeve and switch housing halves. ...

...front brake light switch are wired in parallel to the this switch. Replace the pressure switch in the metal brake line coming from the rear brake master cylinder going to the rear brake caliper. Good ...

...front of the housing. Unsolder the wires, replace the switch with a new one, and resolder the original wires to the new switch. Reassemble the throttle sleeve and switch housing, adjust the throttle ...

...replace that switch, if it doesn't, the problem is most likely at the front brake switch. Wiggle the front brake lever in and out to see if the brake light goes out. If not, it could be the switch or ...

...front brake Replace the rear brake light switch. I've run into this before as well. When checking the switch with an ohm meter, it appears good but it will not light the rear bulb. The front brake ...

...replace the front brake lever and pivot pin. The pivot pin has an E-clip on the bottom of it. Pry off the clip and push the pin up. Remove the lever. Replace with new parts. Hopefully this will cure ...

...Front brake light switch is located next to the hand lever for the brake. Look underneath and you should see two wires attached to a little black box. This is the mirco switch.Rear brake switch is ...

...front hand brake sensor. You may have a bad rear brake light switch. Find the rear brake master cylinder and the metal hose coming out of it going to the rear brake. Follow the line as it goes under ...

...off, if not unplug the wires to that switch if it goes off replace it if it is bad,if its still on go to the front master cylinder unplug it if the light goes off replace the front brake light