Question about Harley Davidson FLHRCI Road King Classic Motorcycles
retaining ring from the headlamp housing. THEN carefully remove the lens and bulb assembly and if installed squeeze the two external tabs and remove the wire connector at the back of the headlamp bulb
Question about Harley Davidson FLHRCI Road King Classic Motorcycles
...retaining ring 3 pull headlight out and unplug.To remove the bulb remove rubber boot and push down on wire loop and push end out from under the retainer lip (you can loosen the screw 1/2 to1 turn if ...
Question about Harley Davidson FLHRCI Road King Classic Motorcycles
removing the screw at the bottom, and then remove three screws from the retaining ring, carefully remove headlight from fairing. The remove the boot at the back of the lens, press down on the wireform
Question about Harley Davidson FLHRCI Road King Classic Motorcycles
...retaining clip away from the bulb aqnd then remove the bulb from the headlamp assembly. FXDWG, FXDXT Models Loosen the trim ring clamp screw and remove the trim ring, pull the wiring connector from ...
Question about Harley Davidson FLHRCI Road King Classic Motorcycles
...the headlamp retaining ring and take the retaining ring off. The headlamp is now unsecured. Unplug the connector from the back of the headlamp and remove the headlamp. Assemblre in the reverse
...ring how do I remove the retaining ring on the headwinds headlight If it's the one i think it is, there is a tiny set screw in the bottom of the ring. Loosen it and twist the ring slightly and
Question about Harley Davidson FLHRCI Road King Classic Motorcycles
how to change headlight assembly Remove screw(s), remove headlight cover/retaining ring, remove connector and remove bulb. Reverse to install new bulb.
Question about Harley Davidson FLHRCI Road King Classic Motorcycles
...retaining clip away from the bulb, replace the bulb and re-assemble all. 2001 FXST and FXSTB Models Loosen the trim ring screw and remove the trim ring, pull the wiring connector block off from the ...
Question about Harley Davidson FLHRCI Road King Classic Motorcycles
Do I need to remove my fairing to replace the headling bulbs? Do I need to remove my fairing to replace the headlight bulbs on my 2004 Harley Road Glide? Hi there, well you can please follow the below
...ring by removing the small phillips head screw on the bottom and pop the trim ring off. Remove the three small phillips head screws on the headlight retainer ring. Pull the whole glass assembly out ...
106 questions posted
Usually answered in minutes!
121 Questions
108 Questions
77 Questions
54 Questions
19 Questions