Question about Harley Davidson VRSCA V-Rod Motorcycles
doing a valve lash adjustment on a 2003 v-rod. The secondary chain tensioner only takes the tension off the rear cylinder. The front cylinder timing chain is still taught and immovable. How do you get
Question about Harley Davidson VRSCA V-Rod Motorcycles
Have a 2003 V-Rod past the 10k mile mark and need the valves adjusted. HD wants $400 to perform the maintenance. What do I need to do this myself? If you are mechanically inclined then the first time ...
Question about Harley Davidson Motorcycles
...Adjust on the looser end of the range: Set the adjusting screw to finger tight so that you cannot turn the push rod between forefinger ... Valve Adjustments - Harley Davidson Forums Aug 21, 2007 99 ...
Question about Harley Davidson VRSCA V-Rod Motorcycles
...adjust valves on my rm-z 250. never did this before.do you know the specs for adjustment? Exhaust power valve adjustment for "stock setting" is: 1/2 turn out from closed. Using a feeler gauge what ...
...adjust valves. The intake valves set at .006 plus or minus .001 The exhaust valves set at .008 plus or minus .001 Remove the rectangular valve access covers at the top front and top rear of the ...
Question about Motorcycles
After adjusting valves my pulsar 200ns top speed and pickup is decreased,what is the problem? Before adjusting top speed is 140 after adjusting the valves top speedd is 115. Please tell me a solution.
noise like valve adjustment too loose. how do I adjust valve clearance? thank you. Valve adjustment is not a simple task, the valve clearances will need "shimming" these are thin pieces of metal to ...
what is the valve adjustment spec? The C90T has Hydrulic valve adjusters and should not need the valves adjusted on it. There is no listed spec only to replace the lifters or adjusters.
Question about Harley Davidson VRSCA V-Rod Motorcycles
Valve adjustment? Can my valves be adjusted or are they self adjusting? I am hearing different stories. Help to adjust the valves on the vn you need to change the shims.
...adjust the valves on your Ironhead, the engine must be stone cold. You want to adjust the tappets so that you have zero backlash on the cold engine. As the engine heats up, the cylinder and heads ...
47 questions posted
Usually answered in minutes!
26 Questions
17 Questions
20 Questions