2002 Harley Davidson FLHT Electra Glide Standard "break light plunger" Questions

...light to stay on. Also, the switch can get gummed up, and the plunger doesn't spring back out when released. Try accessing the switch and spraying around the plunger with some electrical contact ...

...light switch. Sometimes, the plunger gets gummed up, and won't spring back out. You might try cleaning with some electrical contact cleaner (Radio Shack) Other times, the proper procedure wasn't ...

...break light it stays on and dose not go off, like its suppose to. 2 places to check ,,,1, is rt brake lever depressing plunger in switch,, 2, pressure s/w in brake line lt side most time ..these fail ...

...tab on the switch that the brake lever pushes against to turn the light off, though it could probably get worn down. Also, maybe some gunk is in there gumming up the plunger action of the

light wont work when bake break is pushed only when front is pushed it works Examine the rear brake pedal and linkage....there should be a light spring that pulls on the brake switch when you push the

...break away the contact plate from the shoes and clean/dress all electrical arc residue. In order to diagnose the starter circuit, you must start with a fully charged battery, 12.5 volts or better and ...

...clamp. If you get into that area, be careful, you may break off the brake light plunger from it's actuator. I don't feel comfortable telling you to go any further than just removing the rubber