2001 Harley Davidson FXDL Dyna Low Rider "removing gasket clutch cover motorcycle" Questions

...clutch cable. My first question is; When I replace the gasket do I need to put a light coat of transmission fluid on it or, do I replace it dry? My second question is; how many ft lbs of torque do I ...

...clutch drum. Remove the engine sprocket nut and slide the compensator/sprocket assembly from the engine sprocket shaft. Slide the reluctor bowl off the engine sprocket shaft. Push the stator plug ...

clutch cover gasket. i recommend EBC clutches. 1. Set up a little pan with MOTORCYCLE oil in it and place the new clutch discs and pressure plates in it so that they get well-covered with clean oil. 2

...clutch cover gasket Unhook clutch cable at clutch cover Remove clutch cover Remove 5 clutch spring bolts Remove springs Remove pressure plate Remove plates and disc noticing order Replace with new ...

...clutch cover gasket. Take clutch cover off, remove 5 bolts and pressure plate, pull each plate out one at a time keeping them in order, replace with new plates, new plates go in same order. Soak the ...

...clutch cover plate from right side of engine. All bolts removed, cover will not lift; feels like cover plate is attached to something from inside. How do I free cover for removal? seems like its ...

...bolts and no additional torque is required. Reinstall cover with new gasket, fill with oil and adjust clutch lever so it has enough slack to slide a quarter in between the lever and perch. Good

clutch plates and side cover gasket,,,remove the side cover,undo the pressure plate bolts and the pressure plate will come off,then pull out the old clutch plates and steel plates and fit the new ones

...clutch hub for marks. If it rubbed, then either the cover is wrong or the gasket too thin are the only explanations I have(as long as you haden't removed the clutch itself). I hope this helps ...

gasket? Thanks If it is on the right hand side of the bike then yes. Remove the clutch cable by undoing the adjustment nuts on the engine side of the cable and unhooking from the lever. Remove the nut