2001 Harley Davidson XL 1200 C Sportster Custom "remove ignition switch dyna" Questions

...ignition key switch OFF. 2. See Figure 1-18. Connect an ohmmeter. a. Disconnect voltage regulator connector from alternator stator wiring. b. Insert one ohmmeter lead into either stator socket. c. ...

...remove and replace the particular ignition switch. With that knowledge you should be able to tighten or replace loose fasteners as well. IGNITION SWITCH for 2007 FXDWG, FXDC Models First remove seat ...

...ignition switch 2002 dyna low rider ? 1. Remove seat. 1WARNING To avoid accidental start-up of vehicle and possible personal injury, disconnect the battery cables before proceeding. Inadequate safety ...

need to know how to remove. how to remove the ignition switch? Does it take a special tool? A screw driver should do the trick, its just a switch.

...ignition switch and look for fuel streams exiting the pinholes, if any exist, replace tubing as necessary. $38 from Harley $20 from eBay. 3. Check for a clogged primary fuel filter that comes off the ...

...ignition on and push start button, power goes out. all fuses are good, circuit breaker appears to be good as is starter relay. only problem i can think of is starter switch is bad but don't know how ...

ignition switch you tell me! 1. Remove seat. Always disconnect the negative cable first. If the positive cable should contact ground with the negative cable installed, the resulting sparks may cause a