2001 Harley Davidson XL Sportster 883 Hugger "clutch cover" Questions

Ad

Question about Harley Davidson XL Sportster 883 Hugger Motorcycles

1 Answer

...lock nut and the spring. Replace the round cover. Then turn the cable adjuster out as far as you can get it. Then turn it back in until you get a 1/16 inch freeplay at the clutch lever. Good Luck ...

Ad

Question about Harley Davidson XL Sportster 883 Hugger Motorcycles

1 Answer

...clutch to the new one, and reassemble. This is one of those places where a picture is worth a thousand words. If you'd like blow up of the starter contact me a [email protected] I'll scan the ...

Ad

Question about Harley Davidson XL Sportster 883 Hugger Motorcycles

1 Answer

...clutch cover is removed in a two step process. Remove the clutch cable by loosening the adjustment at top and bottom first. Then remove the cable end from the clutch lever. This should give enough ...

...cover of the clutch lever to reveal the lock nut and adjusting screw. Loosen the lock nut with a wrench. Tighten the adjuster screw until it won't turn any more. Step 2 Remove the left frame cover of ...

Question about Harley Davidson XL Sportster 883 Hugger Motorcycles

1 Answer

...clutch cover now i vpull the clutch it grinds G'day. that dosn't sound good. If ALL you did was change the cover & didn't touch anything else(like the clutch) ,it will likely be the ...

Question about Harley Davidson XL Sportster 883 Hugger Motorcycles

1 Answer

clutch cover off. That rod connects to the clutch push button. sounds like it fell out. Undo all the little clutch cover bolts. Carefully pull the cover off leaving all the clutch plates in a stack as

Question about Harley Davidson XL Sportster 883 Hugger Motorcycles

1 Answer

...the cable adjuster. 10. Install the clutch inspection cover quad ring onto the primary chain case cover. 11. Install the clutch inspection cover and tighten the screws to 84-108 in.-lb. (9.5-12

Question about Harley Davidson XL Sportster 883 Hugger Motorcycles

1 Answer

clutch inspection cover screws and remove the cover. Note: When removing the clutch inspection cover, work carefully to avoid removing or damaging the quad ring in the primary cover. (the quad ring is

Question about Harley Davidson XL Sportster 883 Hugger Motorcycles

3 Answers

...clutch cover. ideas? Clutch fluid leaking from clutch cover. ideas? The clutch cover leak is a common issue on the original design, and there is a fix available. Go to your Buell dealer with part ...

Question about Harley Davidson Motorcycles

1 Answer

clutch cable adjustment is about 1/2 way down cable. Remove derby cover on primary cover. Looks similar to this: http://www.hdforums.com/forum/attachments/touring-models/118583d1274757072-derby-covers

Not finding what you are looking for?
2001 Harley Davidson XL Sportster 883 Hugger Logo

60 questions posted

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...