1997 BMW R 80 R "rpm stabling bike" Questions

...bike will comfortably idle with the rpm needle around 2000. This all sounds like a carburetor issue, or? I have plenty of fuel and my bike does eventually run smoothly when it gets over its initial ...

...with your bike. You should set your idle to something between 1~2k rpm when the bike is fully warmed up. If your carb hasn't been serviced in awhile having it idle at 2k rpm will be more

than 7-8k rpm the bike runs fine. any advice? have cleaned carbies, and flushed fuel tank, using goood fuel. your cdi unit is suffering a from power surge try to check the output power if it is stable

...RPM meter needle keeps flickering violently. To me it seems to be a electricity (stable current) problem. Your views, please? Please tell me still itz get missing on ur bike? i might think u better ...

...RPM needle is moving. the battery was down but got it refilled during servicing and it showed a reading of 12.8 but could not check for gravity. as i was using the bike for past two weeks the battery ...

the right oil filter and oil is at the recommended level. I have a 04 flhtci that when the bike gets hot i lose my oil pressure starts up fine @ 40 psi but then goes down to about 10 psi @ 20,000 rpm

...rpm for a few seconds and ramps up again. This bothers me because on uphill dive it loses power at 3500. Ined to reve up beyond 3500 before I climb a hil. After sometime of no using the bike it did ...

...rpm's in the blink of an eye.it's a good reliable machine,and will last a long time w/a little regular maintenance.my 72 year old father has the same bike & rides the hell out of it.30K mi. last ...