1995 BMW K 1100 RS "engine light heat working" Questions

engine to avoid damaging it from overheating.If everything works fine and the red heat light comes on and off it must be a wiring shortcut or an ECU error display.Check the ECU for error codes logged,

light comes on while the motorcycle engine is running then you have a problem. You didn't say what motorcycle it was make or model, so it could be low oil pressure meaning no oil in the engine, engine

...light switch should be mounted to the back side of the rear brake pedal housing. My best guess is that the brake switch is heating up when the engine heats up, and is sticking. Clean the exposed part ...

...engine heats off. Before giving signal to keep the lights low. Once the bike cools back to work normally warms back and the same thing happens My friend, I'd be happy to help you out but I ...

...engine did not "really hot", still should I have seen an alarm light? I found this because I wondered why the fan never turned on. I discovered a bad fan switch ,which I have ordered, in addition to ...

...light is on that my blinkers get dim...shut it off and they brighten up...no clue, help please is the engine over heating. Fan issue doesn't sound like a problem. Check the filament for the high

engine management light my triumph daytona 675 engine management light stays on , i have only had this problem since i did not use the bike for a month , i took the battery out before leaving it , ...

...light switch is on position the key does not turn off bike. (Bike continues to run with key off.) Any ideas? sounds like a wire has been added the wrong way or wires have damage, switch could be the ...

...when the radio shuts off. Also, since it occurs when riding, there might be a thermal issue, as the engine heats up, causing a ground connection to work loose. Check for ground connections in the ...