2000 Harley Davidson FXDWG Dyna Wide Glide "running lights" Questions

...running lights. How do you replace them?? Do you have to run new wires? Being that the '93 model did not come with "running lights', not only will you have to run wires for the "running lights", ...

My break light wont wont work but the running light does on my 05dytna wide glide Bulb problem as there were two wire in the bulb one for brake and other one for running ....

How do I re-set the alarm and/or turn off the security light even though the bike is running, the security light is still on. My bike is 2010 FXDWG and I have installed a Power Commander V. This may h

02 harley fxdwg brake light stays on My o2 wide glide brake light stays on once the engine has been running for 15 minutes or so. After I shut the bike off it works fine 30 minutes later. Start it ...

manual I would like to know if the turn signal lights in the rear should be lit with the running lights on No - the turn indicator lights should illuminate only when turning.

have 01 harley wideglide. have placed 4 led lights with 6 lights per light each light has 1- 2 connectorwire red&black, tied al reds together, same for blacks. i can put reds straight to 12vdc,and

...running lights work but by break light wont Check the bulb first. There are two filaments in the bulb, one for the brake light and one for the tail light. If the bulb is good, there are two switches ...

the rear bulb on shifter side stays on brake when put in. When I jiggle it it goes out but no running light. Then when no running light turn signal works and no brake light .....HELP HELP HELP Sounds ...

lights running Lights Not Working But Turn Signals Working On Rear of bike I don't know what year your bike is so hard to detail anymore than you must have a short in the running lite circuit but I do

...running lights out on the rear @ my right rear bulb has gotten hot enough to melt the lense. Yet my brake lights and turn signal still works, not sure what needs to be replaced or if the socket ...