2000 Harley Davidson FXDWG Dyna Wide Glide "remove fork lowers" Questions

fork tubes out. Remove the plug at the top. There will be a large spring under the plug. Usually it doesn't have much pressure on it with the tube fully extended and if it's the stock spring. With the

...Remove the top cap from each tube and refill the fork tubes with the proper amount of oil for a "wet" oil change. Sorry but I don't have that information but it will be somewhere around 10.2 ounces. ...

remove it the fork tubes should pull down and out remove the top of triple trees remove the cover in middle of triple tree under it you will find a loch nut and a special spannner nut remove both topp

...remove brake pads, inspect the pin/bridge bolt for grooving and wear and measure the pad pin diameter in an unworn area, and then in any area of visible grooving or wear and if there is wear greater ...

...remove the whole fork leg or can I simply remove the lower fork whilst the upper is still in situ. You can remove the lower while the upper is still insitu You probably *can* but if the seals are ...

...hidden by the axle. If it still leaks after seal replacement your fork tubes and lower leg sliders are worn out. Reassemble and remove the top fork cap. Pour in the correct cc of fork oil and

...remove the fork tube from the triple. You remove the top cap and the tube plug. Remove the drain plug and drain the oil out of the fork tube. Remove the screw and remove the lower slider. It is quite ...

...FORK TUBE IF THIS PULLS OUT OF THE LEG THEN YOU CAN COMPLETE THE JOB QUITE EASY, REMOVE DUST SEAL, CIRCLIP AND OIL SEAL, THE LATER WILL BE QUITE TIGHT IN THE LEG, WHEN YOU EASEMBLE THE FORK YOU WILL ...

...fork, and remove the spring. then lift up the dust cover on top of the bottom tube and remove the circlip underneath the cover. the only thing holding the upper and lower tubes together at this point ...

...remove the lower fork leg first leaving fork tube on the bike, some forks it is poss to do this as the busshing is fitted to the lower leg and not the chrome tube, undo the bolt in the lower fork leg ...