2000 Harley Davidson FLSTC Heritage Softail Classic "brakes put" Questions

...put the top back on the reservoir loosly to keep the fluid from splashing out. To bleed the brakes, first, DEPRESS AND HOLD the rear brake pedal, OPEN the bleeder valve on the rear brake caliper and ...

Put something around the caliper to protect the paint and don't damage the piston. Remove the top from the rear master cylinder. Watch the level of the brake fluid and don't allow it to overflow. When

rear brake light not working wheneither lever is used, bulb is good If the rear brake light is working when the rear brake pedal is depressed but not when the front brake lever is pulled, the most ...

...brakes by turning the handle bars so that the top of the brake fluid reservior is nearly level, usually all the way to the left. Remove the two screws and take the top off the reservior. If you add ...

just changed the rear tire and need help getting the rear break back on 1999 heritage softtail If you have the wheel properly installed, putting the rear brake back on the bike should not be a problem

1989 softail. Brake light stuck ON Loosen the two bolts that hold the front brake master cylinder on and push it back against the right handlebar switch housing as close as you can. If this does not ...

where is the fuse box on 02 flstc tha only lights that are working is brake lights and turn signals Have you looked under the seat? That's about the only place on a Softail to put a fuse box. ...

Lights wont work on 2004 softail Put my 2004 softail back together after painting it. Now the signals flash 6 times and I don't have any turn signals, brake lights, or horn. Do I need to reset ...

My son bought a 2009 fat boy and I just noticed today that his break light was staying on . I took his hand break apart enough to look at the pin and it makes no change to the light when pushing it in

do not know what brake fluid to put in my 2004 heritage softtail just add DOT 3