2000 Harley Davidson FLSTC Heritage Softail Classic "bike gear lever slipping" Questions

...bike. Drain the tranny and take the clutch release cover off the transmission. The throwout beaing is a small wafer bearing about a half inch in diameter. It's held on by a miniture clip that is ...

...gear takes a long time to catch up to the engine. 1996 suzuki 800 intruder does the clutch lever release "sharply" and snap back after engagement? then lean bike over drain about a quart of oil, take ...

...bike go into gear without pressing the clutch lever or stalling?, if the clutch was slipping prior to it stopping then this is likely a knackered clutch, it could also be the wrong oil in the gearbox ...

...bike is slipping out of gear or the clutch is slipping. The bike has 53,000 miles on it now. While pulling out from a stop, the engine seems to rev. It's like the bike is slipping out of gear or the ...

changed clutch lever started bike up everything was normal half way into my ride noticed slipping by time i got home bike wont stare unless not in gear help

...gear box out of bike. Have checked centering spring and it is fine Some trans were notorious for being hard to find neutral. When in first and you want to go into neutral, put slight pressure on the ...

...bike will most likely take off from first gear, but when you throttle it, the clutch will most likely slip. if the lever is to loose, lots of free play, you may have a hard time getting it in gear. ...

...gear only. Just changed the cam shifter out due to jumping out of all gears. This slipping is smooth with no clanging of gears, just feels like I am pulling the clutch lever in. Wave washer on the ...

...bike is warmed up i have problems when i go down to first gear to stop... my problem is when i try to move off again in first gear....it will not move...tonight on my journey home i had to turn the ...

...GEAR SLIPS IN AND OUT The bike has a slightly bent shift fork and not fully engaging 6th gear. Is there any chance your shoe is putting downward pressure on the shift lever? That would do it also. If ...