...bike, and loosen and disconnect the throttle cables. There is a vacuum line that plugs onto either the back of the carburetor or the intake manifold. Once all this is loose, pull the carb out of the ...
Question about Harley Davidson FLHR-FLHRI Road king Motorcycles
...bike on a lift (borrowed or owned, just get one) with rear wheel off the ground. Now remove your air cleaner and maybe your filter. Now drop the pushrood tubes one at a time, not all at once (pick a ...
Question about Harley Davidson FLHR-FLHRI Road king Motorcycles
...bike, pull the wheel spindle from the left side out, it may need a slight. Knock to start from the r,hand side, then the caliper. Carrier can be removed , note order of spacers, and place in a safe ...
...bike at the rear of the frame. this is what allows the back wheel to be adjusted. aka wheel adjusters. 2.next loosen the wheel itself. 3.pull the wheel back until there is just a tiny bit of slack in ...
...wheel off the bike and get a shop to replace the stem and re-balance it to avoid speed wobbles Having supported the bike on the main stand or padoc stand, undo the 2 pinch bolts on the rh fork, you ...
Question about Harley Davidson FLHR-FLHRI Road king Motorcycles
...on the brake side of the bike and pull the rear wheel straight out of the final drive housing. Put a little grease on thhe final drive splines upon reinstalling the wheel to aid removal next
Question about Harley Davidson FLHR-FLHRI Road king Motorcycles
...wheel on your bike. On each side of the wheel, there is a seal and a "spacer" inside the seal. If this is spacer is in the seal on each side of your wheel, put the wheel between the forks and slide ...
...wheel, hold the bike bike steady with one hand and place the the other hand on the rear tyre at 3o'clock. Pull it gently towards you. If you feel any play that may be the problem. Check the steering ...
Question about Harley Davidson FLHR-FLHRI Road king Motorcycles
...bike, grasp the wheel top and bottom and pull the wheel away from the drive shaft, some machines the whole wheel, hub and driveshaft are removed as a unit by undoing the bolts securing the rear diff ...
Question about Harley Davidson FLHR-FLHRI Road king Motorcycles
...wheel off the ground and the bike running in nutral.pull the clutch in and put it into 1 gear.Keeping the rear wheel off the ground .if u feel that u have skills. have a friend hold the front of the ...
462 questions posted
Usually answered in minutes!
681 Questions
595 Questions
586 Questions
644 Questions
351 Questions