2000 Harley Davidson FLHR-FLHRI Road king "inner primary gasket replacement" Questions

Inner primary leak, base gasket leak. how to repair Simply, the rocker box and cylinder will have to come off to replace the cylinder base gasket. And the out and inner primary will have to come off ...

inner primary already replaced gasket,seals-inner primary,5th gear,new bearing. Most inner primary leaks come from the alternator o-ring the best thing to do is put on a new one and put clear silicone

...inner primary cover, the inner will have to be pulled off meaning you'll have to take the engine sprocket, clutch assembly, and starter off. To get the starter off, you'll probably have to pull the ...

...INNER primary cover has an oil seal where the transmission shaft goes through. You'll need to tear down the entire primary drive to get the inner cover off. Some notes: The engine sprocket nut is ...

...inner primary seal where the trans shaft runs thru, the engine sprocket shaft oil seal, inner primary O-ring, the bolts that hold the inner primary to the engine/trans, the primary chaincase gasket ...

...inner primary. This is a difficult job for the amateur hobbist mechanic but it can be done. You'll need a lot of tool including a torque wrench that will torque a left hand threaded nut and one that ...

...oil can "travel" while riding at speed. Hopefully you'll be better able to see if your leak is coming from the cover area itself or from the "inner" primary to engine and transmission interface

leak on the inner primary for harley davidson leaks Replace gasket (fairly big job) at least 2.0 hours at your dealership.

...inner primary.  The oil and water is gray and is coming from the front of the inner primary close to the water pump. Kevin Fine Houston, Texas well when you have water and oil both leaking it ...

...What gasket, and seals are required to change stator u need to open up the primary to do it. as far as gaskets, just new one for between the inner and outer primary........ no seal ...