brake light stays on Brake light stays on causing cruise control not to engage. 2005 road king clasic hand break switch was broken (inside the wire housing) not allowing the hand break lever to ...
brake light stays on last time i took a ride i noticed my cruise wouldn't turn on. haven't ridden since because my brake light won't turn off. unplugged both brake light switches and lamp still lit! ...
...brake light is turned on when the brake lever is pulled. The switch is actually located in the right switch housing along with the right turn signal switch, starter switch, and throttle. It's simple ...
...brake light stay on If your brake light is staying on, it's due to one of the two switches are made. You have one switch for the front brake and one for the rear brake. It could be either switch ...
...brake light switch, with this disconected if the light stays on the problem is with the rear switch, locate the switch this will be close to the brake pedal normal spring opperated which can stick, ...
Question about Harley Davidson FLHR-FLHRI Road king Motorcycles
...brake light stays on all the time Loosen the two bolts that holds the front brake master cylinder on to the handlebars and slide the front brake master cylinder down as close to the right handlebar ...
Question about Harley Davidson FLHR-FLHRI Road king Motorcycles
brake light stays on how do i fix it Hi, Check brake switch it maybe stuck. If not replace it with new one.
brake light stays on all the time throttle side signals not working Sounds like you may have a wiring problem in the right handlebar switch assembly. The front brake light switch is in that housing as
Question about Harley Davidson FLHR-FLHRI Road king Motorcycles
brake light switch is probably broken. To change the switch, you'll have to open the right handlebar switch housing by removeing the two bolts that holds it together, take the throttle and idle cables
462 questions posted
Usually answered in minutes!
681 Questions
595 Questions
586 Questions
644 Questions
351 Questions