Question about Harley Davidson FLHRCI Road King Classic Motorcycles
...triple tree, there is not specific torque, just snug. I wouldn't overtighten them due to there very thin profile and rounded corners on some. If you're talking about the cap that screws directly into ...
Question about Harley Davidson FLHRCI Road King Classic Motorcycles
remove the axle 1st the 2 large nuts on the top of triple tree next on the lower portion of triple tree there is a bolt on each side remove it the fork tubes should pull down and out remove the top of
Question about Harley Davidson FLHRCI Road King Classic Motorcycles
...remove axle bolt? Yes you have to remove the axle bolt. Both forks can slide out individually. Make sure you have removed the front wheel, brake calipers and the front fender. There is a brace too ...
Question about Harley Davidson FLHRCI Road King Classic Motorcycles
...axle came out, you'll see an 8mm socket head bolt. If you remove this bolt, the slider will come off. But before you do that, I'd advise draining the oil from the fork leg and releasing the spring ...
...axle goes. This is a "piloted hex key" bolt. It takes a special piloted hex key to remove it but you can get it out if you use a brand new hex key or one that has been ground off on the end so that ...
Question about Harley Davidson FLHRCI Road King Classic Motorcycles
...Remove thee clamp bolts(4) that pinch the down tube at the top and bottom of the triple tree. Then slide the down tubes out one at a time. This means the front axle,fender cables must be
...axle goes through, you'll see a hex head bolt. Use an 8mm hex key to remove the bolt. This is a special piloted key. You can use a regular hex key but it must be in very good shape. I'd recommend ...
Question about Harley Davidson FLHRCI Road King Classic Motorcycles
...axle goes, there is an 8mm socket head bolt. This bolt takes a special "piloted hex key" to remove it but I have gotten them out using a "brand new hex key socket" and an air wrench. The hex key ...
Question about Harley Davidson FLHRCI Road King Classic Motorcycles
...axle goes through, there is an 8mm hex head bolt. Using a brand new hex key, remove this bolt. A hex key socket on an air wrench helps to remove this bolt. It takes a "piloted key" but you can get it ...
...Remove the plug at the top. There will be a large spring under the plug. Usually it doesn't have much pressure on it with the tube fully extended and if it's the stock spring. With the plug and the ...
134 questions posted
Usually answered in minutes!
106 Questions
108 Questions
77 Questions
54 Questions
19 Questions