Question about Harley Davidson XL 1200 S Sportster Sport Motorcycles
...Next, you may have a problem with the accelerator pump on your carb. If the pump is not working correctly. Remove the air filter cover and element so that you can see into the carb. With the ...
Question about Harley Davidson XL 1200 S Sportster Sport Motorcycles
...Carb, including jets were checked - ok. Not visible smoke, but just gives rider that exhaust smell even after short trips. 14 k miles and recently serviced. Is this just typical for sportys or should ...
Question about Harley Davidson XL 1200 S Sportster Sport Motorcycles
my 1962 t120 bonny will only run when both pilot jet screws are fully closed these are two brand new carbs and are jetted correctly etc.bike runs rich when ticking over.help please screwing the jets ...
Question about Motorcycles
...carb. Not only will this tell you the correct main jet size, you will also get the pilot jet size, mixture screw, and jet needle positions. All of these should be checked if you're taking apart the ...
...carb. This is good but the correct main jets may not have come in the generic kits he bought. Too small a main jet can cause overheating. Pull the float bowl of whichever carb is easiest to get to. ...
Question about Harley Davidson XL 1200 S Sportster Sport Motorcycles
...carb is not jetted correctly. If you were dealing with any other Harley besides a V-Rod, I could tell you the proper jetting but I've never even seen an S&S carb on a V-rod. Sorry. Good Luck ...
...carb and am wondering if this is correct the bike rides as before no performance gain. i have kept my standard filter as the noise was to much with a tnt open air filter with no gain so reverted back ...
Question about Harley Davidson XL 1200 S Sportster Sport Motorcycles
carb. the first that works from idle to 1/4 throttle is the pilot cicuit, from there you transition to the needle jet/and jet needle. That controls the 1/4 to 3/4 throttle and then the main' jet which
Question about Harley Davidson XL 1200 S Sportster Sport Motorcycles
...correct approach but here is what I have going on with my 1977 GS750... Well I have a 4 into one pipes with a kerker exhaust, have stock carbs and pods installed... I also have a dyno electronic ...
96 questions posted
Usually answered in minutes!
51 Questions
26 Questions
22 Questions