Question about Harley Davidson XL 1200 C Sportster Custom Motorcycles
...tick over or ticks over at around 500 rpm then stalls The engine idle speed is set too low. If the engine is equipped with a carburetor, the idle speed stop screw is located at the top right of the ...
speed being set a tad too high. On the left side of your bike near the air scoop is the idle adjustment screw, turn it counter clockwise a tick and it will cure the issue. 1000-1050 RPM is normal idle
Question about Harley Davidson XL 1200 C Sportster Custom Motorcycles
My sv1000s idel speed is to high at 2000 Ticks over at 2000 rpm hot and cold Sv1000 should idle at 1200 Phillip screw left side of bike on the trip angle on frame turn it clock wise to slow your idle
Question about Harley Davidson XL 1200 C Sportster Custom Motorcycles
idling. if its only a slight tick under load, probably just the common kawasaki v-twin noise. seems all of them have latters that are unexplainable but never get any worse. mine will be noisy at lower
Question about Harley Davidson XL 1200 C Sportster Custom Motorcycles
speed up tick over need to locate on carb You may have to take the breather off to get to the screw. Some of them can be difficult to get to. Standing on the right side of the bike looking down at the
Question about Harley Davidson XL 1200 C Sportster Custom Motorcycles
my 2005 r1 ticks over too fast when warm and wont slow down with idle screw starts up fine but as soon as its warm it ticks over way too fast its got a slipper clutch on it thats noisey at first but ...
Question about Harley Davidson XL 1200 C Sportster Custom Motorcycles
slight ticking at iddle speed i just bought a used 1999 gsx 600f katana, 24,000 miles. runs and idles very smoothly. i noticed that a slight "ticking" noise is noticeable at idle speed(@800-1200 r.p.m
604 questions posted
Usually answered in minutes!
351 Questions
242 Questions
159 Questions
145 Questions
121 Questions