...engine oil, primary lube, or transmission lube. First, check for a leak at the cylinder base on the rear cylinder. I've seen that area leak badly enough to make it look like the primary is leaking. ...
...off but usually it just comes right off. Installation is the reverse with the engine nut being torques to 150 foot pounds and the clutch hub nut torqued to 60 foot pounds left handed. Good Luck ...
Question about Harley Davidson FLSTF Fat boy Motorcycles
...is located left side of the engine case,you may need to remove the chain cover plate to access it,there will be a spring and filter screen also remove and clean reverse the process then add your
...150 foot pounds of torque to the engine sprocket nut and torqe 60-80 pounds in the LEFT HANDED DIRECTION for the clutch assembly. The front belt drive pulley torques to 150-165 foot pounds as is also ...
...engine sprocket nut (165 ft. lbs. torque) remove clutch assembley (left handed nut) and primary chain. Remove starter. Remove the inner primary. Remove rear brake caliper. Remove rear wheel. Remove ...
Question about Harley Davidson FLSTF Fat boy Motorcycles
...engine nut to 150-165 Foot pounds, the clutch nut torque is 70-80 foot pounds left handed, adjust the primary chain to 3/8 to 1/2" up and down with the engine cold. Check the primary chain adjustment ...
Question about Harley Davidson FLSTF Fat boy Motorcycles
...engine sprocket) nut. This nut is very tight and has Loctite thread locker on it. 150-165 foot pounds of torque. You'll need to something to lock the chain up so the engine does not turn while ...
Question about Harley Davidson FLSTF Fat boy Motorcycles
...cover. fit motor with 3 screws. then open alternor housing using T- spanner. addd those two tooooothed wheels n jst install all d wiring. Warning:::--- If u something about bike engine. then n then ...
...150-165 foot pounds. This is what the locking bar is for, to keep the engine from turning while applying the torque to these two nut. Adjust the primary chain and reinstallt the outer primary. Add ...
...engine sprocket nut torques to 150-165 foot pounds with one line of Loctite 271 heavy hold thread locker in it. The LEFT HANDED threaded mainshaft nut torques to 60-80 foot pounds with a single line ...
201 questions posted
Usually answered in minutes!
152 Questions
134 Questions
13 Questions
12 Questions
8 Questions