1993 Harley Davidson FXR Super Glide "clutch push rod adjustment" Questions

...push rod release until the clutch release arm is as close to the starter as possible then back it up until it's just about an 1/8 to a 1/4" away from the starter. Lock the lock nut down and reinstall ...

...clutch push rod Try to adjust the play in the cable at the clutch perch, leaving play in the cable. If that is ok, then check the push rod adjustment if it has one. Bottom out the push rod screw and ...

clutch push rod becomes welded to the push rod or it will actually start to come apart. When this happens your clutch adjustment goes away and you have no adjustment available through the cable or the

...clutch push button. sounds like it fell out. Undo all the little clutch cover bolts. Carefully pull the cover off leaving all the clutch plates in a stack as some are different to others usually the ...

Clutch push rod will not depress to engage 71 Yamaha 360 RT1. The clutch push rod will not engage. I have removed the side plate and tryed to engage the rod by pushing in with a lever. the rod will ...

...clutch push rod, missing push rod ball bearing or push rod, worn out actuator shaft cam, Missing friction disk (5), or pressure plate (4), totally worn out friction disks, clutch plates not installed ...

...seems to work ? I'm confused by your question. Do you mean when you pull the clutch in it won't DISengage? Did you adjust the clutch push rod at the center of the clutch pack, or just the