1979 Harley Davidson XLH 1000 Sportster "primary cover" Questions

...primary cover off. To do this, you'll have to drain the oil from the primary, take the left side foot peg off, and loosen the primary chain adjuster on the bottom side of the primary. Loosen the ...

...primary cover and screw the adjuster with the lock nut on it all the way into the outer primary. Reconnect the cable to the release mechanism with the link. Replace the outer primary but starting the ...

...primary cover off, you had to turn a screw back by the clutch to get the cover off. Now, you have to readjust that mechanism. This is the clutch release mechanism. First, up towards the front of the ...

...primary cover off is there anything that would be holding it up from the inside. Some models have allen or star bit screws on the primary chain tenioner cover that screw into the inner cover. Other ...

...primary cover with a 1/2" Nylock nut. The teflon/nylon pad is retained by the steel rocker bracket and lays against the chain. When the adjustment stud is used (points straight down out of primary ...

...primary cover off of 1979 harley davidson Lower the primary chain adjuster under the primary but loosening the locknut and turning the adjuster screw downwards. Take the large nut that holds the foot ...

...primary cover. Loosen the nut and using an allen wrench adjust the tension on the chain. Screwing the screw inward tightens the chain, outward loosens it. Do not tighten the chain too tight. As the ...

primary cover, loosen the locknut and turn the cable adjuster into the primary cover all the way. Back at the rear of the primary cover, remove the round "plug", the spring and the locknut. Inside the