1979 Harley Davidson XLS 1000 "cut gearbox oil" Questions

gearbox but only a quart of oil came out. Where is the drain for the rest of the engine, and how do I get oil back in the gear box? there are three drain plugs in every bike and all are present nearby

...gearbox oil is a white-ish color the problem is water emulsifed in the oil. As far a the cutting out, many things could cause it. The points need filed and set or replaced, the carb and filter need ...

...gearbox oil change. Then do another one 50 miles later. This should flush out the dirt and grit currently in the gearbox. You may want to invest in a new clutch cable also. 10w40 motor oil. Clutch ...

...gearbox is clunky and slow with it's straight-cut gear teeth but its 100% bullet-proof. And changing gears is totally unlike other bikes. You have to put pressure on the gearshift lever before you ...

...gearbox. You will need new fiber friction plates if that is what has happened. Normally the only other three things that would cause the problem are a worn shift arm, a bent push rod and a badly worn ...

...cut the shaft. Now install the new shift shaft and check to be sure the gears all shift smoothly up an down, ( rotate the clutch shaft while shifting ). A bent shift fork is a PROBABILITY anytime a ...

...cut. is this a neutral safety switch? could a faulty switch be the reason for my troubles? The neutral switch is wired from gearbox selector barrel, internally. Clutch normally binds when left unused ...

cut out,, is this because the gearbox oil has leaked to the point there is not enough in there,, or is it another problem?? that's a bad neutral safety switch...it's a shop repair...now, the reason it

...and check for metalic debris. Remove and replace oil filter, ( cut open filter to check for metalic debris). Also check the drain plug for excess metalic debris. Could be the gearbox needs some