no second gear Instructions 1. The 2nd gear lockout is, a mechanical speed sensing mechanism. It doesn't care if the engine is running. You bypass it by scooting the bike forward, about 5-6 mph, ...
84 750ef notchy gears bike has 40k mls , gears have become quite notchy both up and down, less so if slipped in with very light clutch movement but worst is if in 1st at standstill, say at lights , ...
...The kick shaft gear, idler gear, and clutch drum gear on the 1985 xr250 and below are smaller tooth gears than 1986 and newer. I have an 85 and an 88. I had to replace the 85 kick gears 3 times. The ...
slippage in second gear,pulls fine in all other gears and shifts fine,feels like broken tooth off gear or something of that nature A broken gear tooth will cause a clicking sound. Start out in 2nd ...
Question about Suzuki GSX 750 EF Motorcycles
what is the gear ratios on a 1990 heritage soft tail 5 speed Here are the stock gear ratios: Gear Ratio (1): 10.11 Gear Ratio (2): 6.96 Gear Ratio (3): 4.95 Gear Ratio (4): 3.86 Gear Ratio (5): 3.15 I
Question about Suzuki GSX 750 EF Motorcycles
engaging 1st gear the gear grinds an clunks into fjr 1300 yamaha when engaging 1st gear the gear grinds an clunks into gear is my clutch on its way out? Often the transmission will clunk when first ...
Question about Suzuki GSX 750 EF Motorcycles
I have a 1984 honda vf1000 motorcycle and 2nd gear is going do I have to replace all the gears or just 2nd gear Replace gears in sets, the bad gear and the gear it meshes with. In what way is 2nd gear
When i stick my bike into forst gear, the clutch judders and vibrates like the gears are grinding together, ive taken the clutch off, replaced tge clutch and all it does is make loads of noise and no ...
Question about Suzuki GSX 750 EF Motorcycles
...down any more. any ideas please as cant get to work! Well, first of all ofcourse find out how many gears you have, if you take it to a shop and they tell you you have "One down, four up" It means ...
Question about Suzuki GSX 750 EF Motorcycles
...a 02' 125 ttr and it make a knocking noise in first gear? shifts fine and no other noise in other gears. You have a broken tooth on the first gear set. This means two gears will need replaced; the ...
18 questions posted
Usually answered in minutes!
329 Questions
228 Questions
165 Questions
158 Questions
169 Questions