Question about Suzuki GS 750 E Motorcycles
...250614318086 new carbs for your suzuki you can buy from dynoman performance. they are selling mikuni rs performance
Question about Suzuki GS 750 E Motorcycles
...setting for mikuni vm26 carbs on a 1978 suzuki gs1000e main jet 145 jet needle 4h11-3 needle y-2 pilot 17.5 float hight 26.6mm pilot air screw 2and a quarter turnsout main air jet 1.0mm pilot jet ...
Question about Motorcycles
Need the float height setting for my VM 24 round bore Mikuni carb All the Mikuni VM's under 26mm are the same 15-17mm from the gasket surface with the tab just barely touching the float needle pin.
Question about Mikuni Motorcycles
mikuni bs32ss doing a carb sync. Where to attach vacuum hose and which screw to adjust. Even the "manual" doesn't identify which screw or where to attach hose. Pictures would be nice. Thanks Each carb
Question about Suzuki GS 750 E Motorcycles
Mikuni roundslide carb. The Engine starts but won't stay runding. Plus it bougs when I open the throllel. I screwed in the Idel adjustment screw. Thanks Steve Turn the air screw and the throttle screw
Question about Mikuni Motorcycles
I have a 1983 kaw kd80 with a mikuni carb and cant find anything about it the only numbers on it are.r3.91.and k80 are these good numbers? when researching this I cant find anything. Hey Dean, What ...
Question about Mikuni Motorcycles
what is the float setting for at XLJOY vm 22 26 mm Mikuni parallel to the base of the carb
Question about Mikuni Motorcycles
Float level setting on Mikuni carb, 30-32 DIDTF Mitzi L200. Remove the float bowl on the carb. Hold the carb upside down, the set the floats level.
Mikuni carb stuck in full throttle. Everything's Mikuni carb stuck in full throttle. Everything's clean and looks to be right except the return spring. How do I make it "catch"? (Yamaha ...
119 questions posted
Usually answered in minutes!
70 Questions
12 Questions