2008 Qlink Legacy 250 "change plugs wont start" Questions

Ad

Question about Qlink Legacy 250 Motorcycles

2 Answers

...a decent one if not try changing plugs if still no spark it could only be the cdi,coil and magneto get back to me buddy my moped wont start it has gas and i have done changed the spark plug 3 ...

Ad

Question about Qlink Legacy 250 Motorcycles

1 Answer

My aprilla rs 125 wont start. i changed the spark plug and it worked last night but today it wont start? Wont jump start either. What do i do? Have you still got a spark at the plug .?

Ad

Question about Qlink Legacy 250 Motorcycles

2 Answers

...wont start atall.changed the spark plug and filter still no luck.doesnt seem to be getting petrol to the spark plug maby you have touched somthing on the carb when you changed the air filter or maby ...

Question about Qlink Legacy 250 Motorcycles

1 Answer

...wont start changed battery for new ,there is a spark on plug but wont fire up could it be fuel mixture to strong. Possibly, but that would be more likely to make it start easily and chuck black smoke ...

...wont start it just wont kick over I changed the auto choke it still wwhont go can u help bike will not start changed auto choke changed spark plug it whont cick over can any one help do you mean it ...

Question about Qlink Legacy 250 Motorcycles

1 Answer

...wont start. I changed the spark plug, took apart the carb, cleaned it, changed the pilot jet, since it was plugged, and stil noting. If i pull it with a car it will start, but if i try kicking it it ...

Question about Qlink Legacy 250 Motorcycles

1 Answer

...change the sparkplugs and see if you get a spark. If you do not get a spark you should take it to a repair center. If you do get a spark with the new spark plugs, install them and see if it runs. If ...

...wont crank up. took out the spark plug and put it against the engine and you can not see a spark coming off. the hole for the spark plug still has compression and can feel it blowing ur finger out ...

Question about Qlink Legacy 250 Motorcycles

1 Answer

...starting before it ran out. Mix is right, took out plug and cleaned it, still wont start Change your spark plug.You may have got too thick of a mixture at the end of your tank and fouled it

Question about Qlink Legacy 250 Motorcycles

1 Answer

wont start i changed the plugs,wires, and had carbs cleaned now bike wont start!! it was running before but didnt have power. any solutions more info needed.. is there compression, does it have spark,

Not finding what you are looking for?
2008 Qlink Legacy 250 Logo

63 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Qlink Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66847 Answers

Are you a Qlink Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...