I have a problem with my Kymco People 150. When riding on a long road with consistant speed, the bike loses revs and slows don until I pull over and let it idle for a few secs. I then start off again,
engine starts when put in gear it stalls check the switch on the stand may not be opening. normally if you leave the stand down it will cut the engine when you put it in gear, its a safety switch.
The engine will run for 30 mins then cut out. The engine will run for about mins then cut out on my 13,000 mile 2002 bike. There is still a spark (on a plug tester) and there is still petrol coming ...
Question about Kymco Stryker 125 Motorcycles
i was on my kymco scooter the other day and it suddenly made a loud rattling noise and their was no power going to the revs. engine starts but makes a bad noise especially when i rev it please help ...
where can i get mannual where can i get workshop mannual for kymco stryker 125 cc ive got the engine but its missing some parts and needs gaskets for head can you help me please hi m8 dont know about ...
Question about Kymco Stryker 125 Motorcycles
should the flywheel move counterclockwise without the engine??? Typically the flywheel is keyed to the crankshaft and cannot move without rotating the engine also. If the key is sheared then the ...
how to tune the timing chain of a 4 stroke motorcycle crankshaft at tdc, cam sprocket marks in proper position with locator marks on engine, ( this usally means on single cyl the valves will not be ...
...1: Go to mechanic Option 2: Adjust the tappets. If you have never adjusted tappets or worked with engines before it is better to have someone experienced with you. The following is the procedure I ...
Question about Kymco Stryker 125 Motorcycles
...never worked on your specific model, but this is a basic procedure that works on almost all small engines. there may be some variations though. but for the most part, follow these steps and take ...
42 questions posted
Usually answered in minutes!
16 Questions
7 Questions
6 Questions
2 Questions